trenga swing arm

[blaster240R]

hi guys im new here, my question is i have a +2 inch trenga racing swing arm can i mount my stock rear skid plate on it or do i have to buy an aftermarket one. i cant find my stock one right now so i dont even know if it will bolt up or not any help would be greatly appreciated. thanks Ryan

 

[mr_3_0_5]

i got a trenga swinger +4 tho but the stock skid plates bolts right up to it..

 

[blaster240R]

hey thanks for the info m 3 0 5.

 

[blaster240R]

just wondering you didnt have to do any modifications corret.

 

[mr_3_0_5]

we have alot of the same parts..
you got me on the axles..
i got you 1mm on the carb..lol
are you sure its a 35??
and +2 on the swing arm..
put some pics of that bike up man..

 

[mr_3_0_5]

besides bend my stock plate into its original shape nope went on fine after that..

 

[mr_3_0_5]

you can see it in that pic..

 

[blaster240R]

positive i have the box right in front of me i purchased it for ct racing.

 

[blaster240R]

alright thanks. if i can find it im gonna put it on

 

[mr_3_0_5]

hmmm cause ct sells a 36 and a 38mm carb with thier kits unless they changed it..

 

[blaster240R]

yeah they do now i bought the kit back in 99 they've changed it since then

 

[blaster240R]

that and the kit was made to run pump gas also

 

[mr_3_0_5]

oh yea.. i have to run 106+ octane..
thats cool..

 

[blaster240R]

but its been very reliable. and has really good power

 

[blaster240R]

that alum. airbox made a big diff. too

 

[mr_3_0_5]

oh im sure it does make good power..
i got an airbox as well.
ct kits are the chit..

 

[blaster240R]

i found my skid plate and had to do some fab. to it. the back bolts bolted up fine but the front was 2 inches shy of where it was supposed to be. had to extend the front part of skid plate to get it to fit. they must have done something differently on mine for some reason.

 

[mr_3_0_5]

mine bolted right on..

 

[blaster240R]

yeah i believe ya. but i had to do a little work to mine. it wasnt to bad though.