Tranny Gears

York Racing

New Member
Apr 3, 2010
1,766
15
0
Pennsylvania
I need a newer foward idler gear and the gear that goes right behind the clutch. The idler gear can't have too much slack and the other gear must be tight with the plate. I am willing to trade some aftermarket parts for the parts and I could use a extra clutch so PM me with what you have.
 
Sorry for the delay but I finally dug out the gears that I had left. These are the three that I have left from inside the clutch cover. Let me know if these are what you need. I also have a complete traansmission gear set (gears from inside the cases) with the shafts and forks and a kicker shaft assembly with the spring and gear.

2l8daa.jpg

v8ip14.jpg
 
Still missing a balancer shaft drive gear BUT, I happen to have one I've already pinned tight.

Together, stabor1122 and I might have you covered if you still need those parts.
 
Sounds good. So I got the balancer gear from you, the idler, clutch, crank gears, and probably kick starter from Blaster7. So I got almost a whole new clutch side.