When you get all the parts, lobb into BF and ask questions before you do anything.
Lots of good info here, and folks willing to go out of their way to help!
Lots of good info here, and folks willing to go out of their way to help!
Top End Rebuild, Need Help!
- Thread starter Brenden
- Start date
Hey guys!! Got the blaster running today!!! My question now is can I somehow check to make sure the oil system is working?? I feel like that may have been the problem along with not warming up correctly....also the machine was hot wired to be key less by previous owner...I noticed that there are a few wires unplugged
When I plug in the wire in the front of the four wheeler it idles but will die if you give it gas, I'm guesses it's unplugged because of the TORS system or whatever that is called....there was also a unplugged wire coming out of the carb that i plugged back in and the quad runs fine still
When I plug in the wire in the front of the four wheeler it idles but will die if you give it gas, I'm guesses it's unplugged because of the TORS system or whatever that is called....there was also a unplugged wire coming out of the carb that i plugged back in and the quad runs fine still
If it ran more than a minute, it's getting oil. Could pull hose from carb a kick it to see if oil comes out, won't be much
while its running you can pull the oil line off for 5 seconds and a little bit should purge out.
dont do this more than 15 seconds though!
dont do this more than 15 seconds though!
