toomey b1 question...quick help?!

[HunterDan]

i am getting ready to put my toomey pipe/silencer on and was wondering where the springs go. i have a short one and a long one. which side of each pipe do they go on?

i cant get this dang thing on!!!

theres the flange type thing that fits into the end of the pipe and i guess gets held on by the springs? how can i get it to connect to the exhaust port properly???

 

[92blaster]

when riding on the blaster the right side the long spring goes on and on the left the short one goes on

 

[hickskateboarder]

bolt the flange on to the jug. slide the pipe on. put the springs on. put the silencer on.

be sure to rejet. look in the diy on how to do a plug chop.

 

[nightmare420]

a plug chop? im listening.... ha i got a toomey but never heard of a plug chop.. enlighten me haha

 

[HunterDan]

i got it almost all on.

the top of the pipe were it connects to the frame, i just cant get the bolt on the bottom of the piece to stay in the pipe. it screws in somewhat, then i can wiggle it out