tire pressure

[blaster240R]

ok guys here's what i got ITP holeshots with ITP rims (non beadlockers) any suggestions on what tire pressures i should run? front and rear.

 

[blaster01]

idk about fronts but in the rear run a heavier pressure like 10-12psi in them for like the first ride soo they seat good and then u can turn the down to like 3-5 psi

 

[Country Blaster]

I have 18" ITP holeshots on ITP rims and I run about 4psi on the rear, works good for me. I ride mostly on rock roads/trails.

 

[jahrastapark]

30 PSI IN 20X11X10 rear? i guess?

 

[blaster01]

30 PSI IN 20X11X10 rear? i guess?

hahaha dude ur not serious r u.....take about 26 pounds out

 

[yb200]

hahaha dude ur not serious r u.....take about 26 pounds out

wow

 

[blaster01]

wow what??...tires are not supposed to be run at 30 pounds..there supposed to ran at like 3-6 pounds

 

[tjsdaname]

I run 7psi in the rear and 11psi in the front

 

[jahrastapark]

its more like 25 regardless. dunno. called for 36 pounds max. so i went 10 lbs less

 

[burnin'_oil_2001]

I run 7psi in the rear and 11psi in the front

Unless I am in the sand I run the about same 6psi rear and 10psi front. In the sand I drop the rear to @3psi.

 

[burnin'_oil_2001]

its more like 25 regardless. dunno. called for 36 pounds max. so i went 10 lbs less

I used to run high pressures like you do and there is nothing wrong with it -- if the tire will support it (read the sidewalls of the tire). When I was running the higher pressures I was riding in gravel pits and on fireroads. The reason that I switched was because I like the ride and traction better at the lower pressures and I am still getting great tire life. The psi recommendations for my truck are 40 front 80 rear but unless I am hauling or pulling something heavy I go 35 all around for a better ride- though less mpg.

 

[Outlawed Genetics]

i usually go 6 in the rear and 7 in the front

 

[wrench man]

I pumped my rear tires up to about 5 PSI so they would have less traction, it helped with keeping the front end on the ground on a HARD launch, I still have the fronts at 3 PSI so it will steer.

 

[Blasterdude27]

I run about 5 in my razar cross's.

 

[blaster240R]

thanks for the info guys.

 

[2004 YFS200]

wait wtf if your running like 5 psi on your rear why does it say on the stock tires fill to 36 psi........

 

[Country Blaster]

wait wtf if your running like 5 psi on your rear why does it say on the stock tires fill to 36 psi........

Mine say "do not exceed 36psi to seat beads" that's just for mounting purposes, not as a recommended operating pressure.

 

[2StrokeFTW]

I run 8psi all around works awesome, nice ride and good traction give it a try

 

[yb200]

36 psi haha that would be like ridin one of those old honda 3 wheelers with no suspension