Tailight quick disconnect help

[BLASTER 02]

Looking to make a toggle switch mounted into the plastic next to the key so for a flip of a switch the brake light will work when on and then off when wanted to.
Switch on=when brake pressed taillight lit
Switch off =when brake pressed taillight will not light. Anybody can help me with this? How do i do this? What parts? Thanks.

 

[JonS]

you gonna be running from the popo? lol

 

[Painthehouse]

Don't have the brake light to check but all you probably need is a switch somewhere in the circuit. Any SPST switch should work.

 

[Blaaster]

Now steady on how you answer this, as this mod seems dubious, no one needs to be incriminated.

 

[BLASTER 02]

Lol you got me jon but what do i cut the wire and take both ends to 2 different ends of the switch.

 

[Painthehouse]

Lol you got me jon but what do i cut the wire and take both ends to 2 different ends of the switch.

That's all you do ^^^

 

[York Racing]

"Knight Rider, ACTIVATE!" A steath mode wouldn't be such a bad idea. lol

 

[Blaaster]

Looks to me as if it is the blue wire that comes out of the light switch.

If you cut it and extend it to a single pole single throw switch it will do what you require.

Are you going to pay my fines?

 

[BLASTER 02]

No. I ride at a closed down golf course my grandma owns woods and in the snow is what im talkin about lol. Riding in the street is borin unless its snow. It also eats up my tires.

 

[BLASTER 02]

Lol yea and i know i thought o it the other day. Could i also hook up little fog light like the walmart ones or is it too much watts. ?

 

[Blaaster]

Ifeel it would struggle running two lights, but you would not need the main on in fog would you..

Maybe you could rig up a curcuit to switch out the main and put in the fog.

No more than 45 watts.

Please share, what is the reason for dumping the tail light, with a Blaster they aint gonna catch you anyway.

 

[York Racing]

Haha golf course! "Whooooo! Sand trap!" lol

 

[Blaaster]

Haha golf course! "Whooooo! Sand trap!" lol

Water hazard, undulations, where do I find an unused golf course?I:I

 

[BLASTER 02]

Lol so i could night ride to the fullest and idk their was like 30 people today got some pics and vids if you guys want to see them. And thanks for your help guys

 

[BLASTER 02]

How would i wire main lights and fogs to the same source without being both on with the fogs having their own independent switches.

 

[Blaaster]

Double pole, double throw switch will turn from one to the other with a flick.

 

[blasterboy 2000]

Ifeel it would struggle running two lights, but you would not need the main on in fog would you..

Maybe you could rig up a curcuit to switch out the main and put in the fog.

No more than 45 watts.

Please share, what is the reason for dumping the tail light, with a Blaster they aint gonna catch you anyway.

i run 2 lights. hooked one to the high beem wire and one to the low beam. and aimed one lower and one higher. i didnt wire it. the guy i bought it from did.

 

[BLASTER 02]

Thats a pretty good idea thanks for your help.

 

[blasterboy 2000]

Thats a pretty good idea thanks for your help.

welcome. just make sure you ground them right. i am prolly going to get some shee lights and put them on mine instead of the ones i got.

 

[BLASTER 02]

How would you mount the banshee lights on? I would nt want them on the hood but like where they are on a shee. Gunna go get those switches today and make a diy. Thanks for your help.