stripped hub

[gsustaitav19822]

So i was inspecting my blaster and noticed that i had some play like 1/2 side to side took it off and this is what I got but my cuestion is could it be the axle cuz its the second one in a year and half that i had the bike the hub i got it used from eBay what you guys think

 

[tbrooks]

Could be, I would think the axle would have some wear if you ruined one hub already. Are you running the right amount of slack in your chain?

 

[Blaaster]

If you have replaced the hub and the same thing gas happened, I would fear axle wear.

Do you usually use plenty of grease in that area, or do you fit dry?

 

[gsustaitav19822]

If you have replaced the hub and the same thing gas happened, I would fear axle wear.

Do you usually use plenty of grease in that area, or do you fit dry?

Yeah that what I was thinking that there was some wear on the axle well that only means that i will be down for a few weeks un till i get à new axle but this time i think i will be getting à afther market one what do you guys think of the tusk thats the most afordable one. And still get afther market but that will have to whait à lil cuz family is first and them gammes lol

 

[jus_me]

Most likely the axle took out the new hub. Was there any play at all when you installed it? YOu could go with a Banshee axle. There a little wider and you can get them for fairly cheap.
http://rover.ebay.com/rover/1/711-5...0001&campid=5337529790&icep_item=290927002458

Or a used oem Banshee axle you can find even cheaper. $75 range ?

 

[gsustaitav19822]

So i pulled the plug on the new axle and ordered the tusk axle for it let see how it works thanks to all for your help i will provide à ride report one i get everything back

 

[Awk08]

So i pulled the plug on the new axle and ordered the tusk axle for it let see how it works thanks to all for your help i will provide à ride report one i get everything back

you'll like the tusk axle, been running one for a few years now, I have a write up somewhere on here about setting it up and where to put the spacers.

 

[gsustaitav19822]

you'll like the tusk axle, been running one for a few years now, I have a write up somewhere on here about setting it up and where to put the spacers.

Actualy that why i got it i read your thread about it thanks à lot awk