Stock Blaster, looking for mod ideas

[nhquinn]

Hey guys, i'm new to this forum. I have a 2002 Blaster, completely stock other than a UNI air filter. I'm wondering where i should begin with upgrades that will get me more out of the machine.

I'm looking for easy, fairly cheap thigs at first, such as pipe, jet kits, sprockets, etc.

I ride trails and open pits mainly, in new england, sometimes i stud my tires and take it on the ice. Let me know what you guys think, and product suggestions. thanks

 

[yamaha28]

The best top of the end pipes are the Toomey, or Factory 7 pipe. They have tremendous power and are about 375 for the pipe and silencer. Or you could go with a FMF pipe which gives you some good power, but no where near the other one's. You should be able to find used FMF for about $200-$250 for the whole system. If you get any of these exhaust systems you will need to rejet accordingly.

 

[blasterdemon7]

I would read up on the stickys at the top of each section. Lots of great info to help you decide what upgrades to do.

 

[TechBlaster]

AND, welcome to the forum!!! I:I

 

[Awk08]

welcome bro !

 

[01BLAST3R]

welcome bro~!!!!!

 

[EvilElvis]

Welcome to the forum .....very cheap and major upgrade 400ex rear shock and you can get the kit here for the conversion http://kenoconnorracing.com/400EX Shock on a Blaster.html and watch the video

 

[super noober]

click the link in my sig and you wont be sorry I:I

 

[Prime]

Welcome to the sickness!! Best bang for your buck will be porting and exhaust. Just my .02

 

[brandoz28]

Welcome to the forum! I would start with getting a 400ex or 250r rear shock, then keep your eyes open for some works front shocks. Or on a budget banshee shocks.

From there a good pipe, rejet, and just general health check up