Shocks?

Herpderplol

BRRAAAAAAAAAPP
Aug 22, 2012
6,290
497
136
26
Dickinson, ND
So im looking on craigslist just for deal ya no, and i found a blaster for 600 with a right bend, i was gonna buy it for pipe and resell, buts it was gone in a day.

I found some Penske gas shocks, the guys has 2 pair, one 15" pair, and a 19" pair. They are brand new, never been charged, do you think i should jump on it? the only bad this, they dont have any springs... But are still brand new gas shocks...

Does anyone know where i could get springs??
Or if they could be put on blaster with bushings??






Thanks all I:I
 
I already replied on the other thread about these, and if you think those are brand new, I have some ocean front property in Arizona I will sell you real cheap!!

You seem good with these, where can i get springs and the other stuff i need?
I know where i can get them charged
 
Must be a newb with the double postings!!!:p You can clearly see that 3 shocks are missing the spring retainers,looks like the bushings in all 4,springs in all 4,recharged etc. If you bought them what springs would you go with single,dual,or tripple rate springs? As said in your other post these need some money to get them functioning correctly.Not something you want to get into just my .02 cents
 
I was just wondering what they were worth and if they would fit in my other thread, this one im more looking at, should i buy them, what do they need...
 
If you buy these you are throwing your money away. There are much better ways to throw your money away like vig, small bills, paper bag. I gaurentee you can buy ALL my stuff, drop your motor in and ride . Plus you would have all my motor stuff and couuld work on building a 50 hp motor.
 
If you buy these you are throwing your money away. There are much better ways to throw your money away like vig, small bills, paper bag. I gaurentee you can buy ALL my stuff, drop your motor in and ride . Plus you would have all my motor stuff and couuld work on building a 50 hp motor.

If I had the money, I would walk to Ohio to buy your quad, I'm not kidding
 
Hey Herpderplol, i'm glad you posted here, because I dont have enough post under my belt to reply to your marketplace ad. I'd like to buy your stock red shocks you have, maybe the stock carb too. shoot me an email or pm. Thanks!
 
Hey Herpderplol, i'm glad you posted here, because I dont have enough post under my belt to reply to your marketplace ad. I'd like to buy your stock red shocks you have, maybe the stock carb too. shoot me an email or pm. Thanks!

I will email you asap, i do not have a stock carb... The arbs i have are 28mm and 35mm mikuni's. Stock carbs are 26mm

If you are planning on going from a 26 to a 28, theres no point really, all it gives you is jetting problems
 
those are nice its an exhaust gas tempreature sensor it's like having EFI fuel economy and it eliminates quite a lot of jetting problems. similar to fuel injection on a 4stroke