rusted bearings

[baseballertc14]

how would u get some rusted bearings out of a swingarm. i got some in there and they wont come out. tried beating them but aint work

 

[89custom]

is this in the axle carier or the pin bearings in the swingarm itself?

 

[baseballertc14]

i think tha axle carrier. not to sure but i think thats it

 

[mr_3_0_5]

front or back of swing arm?

 

[baseballertc14]

where tha axle is

 

[DUALSTROKE]

Use a punch and beat the hell out of it.There is a spacer between those bearings.Push the spacer to the side and place the punch on the lip of the bearing.After a few hits move the punch about a 1/4 of the diameter and hit again.Keep moving it and repeating till it comes out.Also soak it in some pb blaster or penetrating oil the nightbefore and that will help out also.Good luck

 

[baseballertc14]

so actually its the the front that connects to the swingarm not the axle part