Haven't found anything regarding what I call "Runaway idle". I just bought a 2006 blaster which I bought from the original owner, who says it's all stock. He said he recently had the carb rebuilt. Well I found the pilot airscrew turned all the way in, so I have been trying to re-adjust it but I'm still getting these super fast idle speeds more like wide open throttle. Some of you have mentioned on here about the idle speed adjuster screw being under the rubber flap, but I haven't had any luck with it???
Update: I just removed the t.o.r.s cover and found that the adjustment screw had been turned too much, and therefore was dis-connected from the black plastic piece with the spring on it, so I reattached it. -Further updates can be found down the page-
Update: I just removed the t.o.r.s cover and found that the adjustment screw had been turned too much, and therefore was dis-connected from the black plastic piece with the spring on it, so I reattached it. -Further updates can be found down the page-
Last edited: