rear hydro's

[coreyownz]

anyone make a bracket in order to make a new hydro fit a stock mechanical caliper bolt setup?

 

[coreyownz]

anyone?

 

[Blasterb0y794]

Alot of people have. No one can really help you here though. Depending on what kind they are, there all different. You need to make a bracket obviously. Its self explanatory. just make a bracket to the caliper to the carrier.

 

[76ranger]

I made one for a 400ex .. Used a piece of cardboard for a template. ...

http://viewmorepics.myspace.com/ind...iewPicture&friendID=150112090&albumId=1871778

 

[coreyownz]

anyone wanna sell me a bracket so i can use my 2003 blaster hydro setup on my 01 carrier? not that good at making this kind of stuff..

 

[foolish913]

all i did is i bought a carrier off an o4 off ebay for 40 bucks its fairly easy to change

 

[mystahagy]

I've been interested in swapping over to rear hydro too, but seems like the master cylinder needs a good bit of work to properly mount.

 

[coreyownz]

yea but all the carriers i find keep going real expensive im watching one right now

 

[stephen12091985]

do you know if the 03 brake pedal fits on the 2000 pegs?

 

[phragle]

think!!! no it doesnt (well it does, but it wont work) you will need to weld tabs on the frame to mount the mastercylinder, then weld a tab on the original brake pedal that will push the piston in the correct direction. its actually really simple if you have a mig or tig

 

[stephen12091985]

well i was gonna buy some 03-06 foot pegs.will they bolt up?

 

[stinkinlincolnw/blaster]

my Banshee Rear Brake Project. - Yamaha Blaster Forum

 

[phragle]

yes they will I have a set of brand new chrome 03's that have never been used.

 

[Paulie B]

I made a bracket to mount my CBR rear hydros.
Not much help can be given other then use cobalt drill bits if your drilling steel.