My rear brakes dont stop me as they should! Possibly in need of new brake pads? If so what kind of pads should I buy I have a 2000 blaster.
My rear brakes dont stop me as they should! Possibly in need of new brake pads? If so what kind of pads should I buy I have a 2000 blaster.
where can I get the kit?Awk08 rear brake conversion kit! Those current brakes with new pads still won't stop you very well.
Thanks awk! Might go this routethis set comes with new gasket and o-ring
http://www.ebay.com/itm/NEW-rear-br...Parts_Accessories&hash=item338bdd2566&vxp=mtr
Thanks awk! Might go this route
Got a link for a good hydro setup?Don't forget the how to thread.....
http://www.blasterforum.com/threads/cable-rear-brakes-how-to-make-them-work.3830/
If/when that fails again, then its time for hydro's
Got a link for a good hydro setup?
That's right^. I wouldn't even waste effort trying to make those work. To each there own though.They are supposed to be self adjusting, so that the pads move inward as they wear, but it doesn't always work. Even when functioning perfectly, they still aren't great. Everyone here here will recommend the setup that awk makes, it works great
Do these look like stock brakes for a 2000 blaster?no link, but I can send you the info
no link, but I can send you the info
ok I'm trying to go the cheap route for now and buy the pad kit on eBay u sent me and eventually go with your hydro setup!yes, those are the stock cable brakes
I noticed my disk in the back is loose between the pads? Is this because of worn pads?yes, those are the stock cable brakes
Does the axle move inside the brake hub when brakes applied? Or are talking about the side to side play the disc has?I noticed my disk in the back is loose between the pads? Is this because of worn pads?
Side to side playDoes the axle move inside the brake hub when brakes applied? Or are talking about the side to side play the disc has?