raptor 660 rear brakes on a blaster ?

[hvacdude]

Has any body tried to put rear hydro's off a 660 raptor on an older blaster ? are they all about the same ?

 

[stnditup2]

My best advice is either 1 buy a carrier off a 03+ blaster bc they are Hydro brakes or 2 find a Banshee Rear Brake Setup from the Pedal back and cut and weld to install it.... Ive never heard of 660 brakes on these but if your any good at fabbing you shouldnt have a problem doin nething....

 

[hvacdude]

ive fabed a few things in my life time im pretty sure i can maake it work but the closer the better on the parts the easier it will be....

and thanks

 

[chrisroberts916]

Has any body tried to put rear hydro's off a 660 raptor on an older blaster ? are they all about the same ?

My rear hydros are off a '04 660. I just made a bracket to hold the caliper, weld a tab to mount the master cylinder and extend the brake lever. Couple hours of messing around. I use the stock rotor and rotor hub. The calipers are the same for raptor 660 and warrior and I do believe they are the same as the shee. If you got a '02 or older blaster your going to have to do fab work anyways so you can use a caliper off of just about anything.

 

[hvacdude]

thanks for the info guys...

and if you could get me a pic of that bracket and maybe how you did that bracket that would be great....ty

 

[hvacdude]

anybody no were i can get a caliper ? the 1 i got off ebay is JUNK so im looking for 1 again and i got the rest of it and i hope its good lol...

 

[245stroker]

Someone correct me if I'm wrong, but I believe the caliper's are all the same. '03 and up blaster's, warrior's, shee's and raptor's. Anyone of those caliper's should work for you

 

[hvacdude]

was looking at a raptor 700 one and for some reason it looked different ?

 

[MXsandracer]

keep looking on ebay for setups off of different quads (banshee, warrior, raptor, wolverine, etc.)
thats how i picked up my 660 master cylinder for $5.