Quick question !

[Zbskater400]

I feel like a dummy right now bUT when you break in your quad. I see all the time about retorqueing your cyLinder and head. Dies that mean you loosen the nuts back up and re torque to spec or just put your torque wrench on the nut and torque it again and make sure it clicks ? I've been wondering for a while that's what I've been doing but not sure if it was the rite thing to do

 

[Bluesman]

Do not loosen the nuts. Just put the torque wrench on and tighten til it clicks. Make sure the motor has cooled down.

 

[Blaaster]

/\ /\ What he said.

Heat cycle, let cool then re torque!

 

[jus_me]

^^^ as said above. Also so you know,, maybe a few if any, or maybe all of them will need tightening more. Some may go more some not. Just be prepared for it to click right off the bat. We don't want you to crank it down missing the click and thinking Wtf !!