Quick banshee question???

[bobdryerr]

So as everyone one knows i ended up being able to keep the shee... well so far i put a brand new top end rebuild into it.. then i replaced the carbs with the 2 to 1 kit with all brand new parts also. well then i had to replace the throttle cable cause it was to short.. now when i start the damn thing it still dont fire right on the right jug.. i even switch reeds an plugs an plug wires to see if that would fix the problem but it dont.. could there be an air leak some where guys...

 

[yzrider]

could be a air leak, have u checked the thing that brings air and gas to the head from the carb yet, idk dude, i know nothin about shee's, nice to see u back on though

 

[bobdryerr]

thanks man... yea the boot is brand new so is the carb an the adaptor.. thats y im also woundering if it aint a timing issue maybe not sure. its got me stumpped

 

[blasterdude14]

i doubt any of us could really figure it out, powersportjunkies is a good place to ask

 

[bobdryerr]

yea i just posted over at bansheehq.com even tho i hate some of the peeps there.. o well maybe its something small that i can get fixed so i can break her in

 

[yzrider]

yeah, could be timing, or a air leak in the boot, idk

 

[ron89]

doesnt sound like timing, i would do a lesk down test, if you swapped the coil wires and still ran the same then thats not your problem, hmm idk i had the same prob before it was just the one carb messin up, i would check the reeds make sure every thing looks good, did you do a compression test, i know you said there fresh just throwin that out there.

 

[bobdryerr]

Yea I'm gonna do another test tomarrow. I'm startin tothink its pry gonna be a head gasket. Even tho its brand new I just have this feeling that's what its gonna be.