Procedure to open the engine case!

[lassek]

I have removed all hex and star screws from both sides of the engine.. I have removed clutch cover..

In order to open the case in the middle is it required to remove the flywheel ? Or can i open it while its there?


Oh and IF i need to remove flywheel can this baby do the trick?

Svinghjulsaftrkker, Yamaha - Svinghjul, tnding - Popcorn - CPI - Knallert- og scooterreservedele - thansen.dk

On Danish (my language, it says : flywheel remover, Yamaha) But the shop that sells it sells scooters and scooter parts.. but will it work on my flywheel...

 

[tihs]

Yes you will have to remove the flywheel to split the case.

that looks like it would work.

 

[stephen12091985]

yes that is the flywheel puller

 

[lassek]

Ok i will buy that flywheel remover, when i have removed that.. what the final step to get it open? anything else locked? or do i need to split it with a chissel and small hammer?

Also : WHEN removing flywheel, do i need to mark timing or anything else? Or do i just take it off and put it back on later without problems..

 

[FLOTEK]

you really need to get a manual ,it will eliminate asking for help on every stage of the dissamebly ,they are cheap and will make al lthe difference

 

[wrench man]

You need the puller to get the flywheel off, there are more screws under the flywheel, and the flywheel is keyed it only goes on one way.

 

[lassek]

Well i got my hands on The Blaster Service Manuel.. think its is a original Yamaha.. however it states that there are several special removal tools needed.. But i will remove the flywheel and stator on monday when i have the needed tools. . .

 

[blasterkid777]

to split the cases do you have to remove the clutch side too? i just want to split the cases to get a quick check on the gears and stuff i dont want to do any major disasembally.