D
dadeboysblaster
Guest
im ordering my clutch for my blaster but i think im gonna have problems finding how to put the plates in order.....
you want to start with one of the friction, and then just go metal friction metal friction... and so on, but when you put the metal ones in, you want to rotate the little nub things on them evenly throughout the basket, roughly 60 degrees i think... also remember to aline the clutch plate cover, there is a little dot, that matches to another dot on the actually basket, easy to notice, but a common mistake.
They go in the same way they come out. Depending on what type of clutch you bought will determine if the wavy washer is used or not. Also do not loose the ball bearing between the rods. There is also a dot on the pressure plate that WILL need to be lined up with the clutch boss. Finally, be sure to adjust it correctly.
We sell a manual for $28.00 that is a God send for all.
P.S. do not forget to soak the new frictions in oil prior to installation.
We sell a manual for $28.00 that is a God send for all.
P.S. do not forget to soak the new frictions in oil prior to installation.
