Pingel Valve

racerdonnie13

New Member
Sep 29, 2011
101
1
18
44
Anyone know where i can get a single outlet pingel valve, that will fit the stock blaster tank? Everyone that ive found seems to be a dual outlet valve.
 
Most all are a single outlet. It's also called a petcock. It has two tubes inside to help you from running out of gas while your ridding . If your trying to find one with more flow, a Banshee one will fit. The tubes inside are a little larger for more fuel volume.
 
Anyone know where i can get a single outlet pingel valve, that will fit the stock blaster tank? Everyone that ive found seems to be a dual outlet valve.

Yamaha Dirtbike Fuel Valves, Petcocks

Most all are a single outlet. It's also called a petcock. It has two tubes inside to help you from running out of gas while your ridding . If your trying to find one with more flow, a Banshee one will fit. The tubes inside are a little larger for more fuel volume.

He's talking a Pingel petcock for greater flow for his drag blaster. The dual outlet is for twin carburetors for drag banshees to supply enough fuel to both carburetors.

The upgraded blaster petcock has no "stand tube" for reserve but has an even larger diameter tube than a banshee petcock for increased fuel flow.
 
Thanks Guys. I didnt even think to check the Pingel site... Only thing...why does it say it fits 98-06? Are the older tanks different?
 
NOW, the pingel valve for a blaster MIGHT be a stock size fuel tube.

I recommend you call them and ask them about the 3/8" (10mm) fuel outlet tube for a lectron/PWK carburetor.
 
The choke point is actually in the float valve in the carb, I would just get a banshee valve and remove the screen filter tube and drill a hole in the top of the gas cap.
 
Unless you are running a huge hp/displacement engine running on alcohol, do you really need a larger valve?
I am running a 250 MX engine with a 38mm carb jetted rich for winter and it will run full throttle for miles with no sign of lean out.
Is this big valve need for real?
 
Unless you are running a huge hp/displacement engine running on alcohol, do you really need a larger valve?
I am running a 250 MX engine with a 38mm carb jetted rich for winter and it will run full throttle for miles with no sign of lean out.
Is this big valve need for real?

just as you said unless your running methonal you really dont need a pingle. i would recommend you run a stock banshee petcock.
they have twice the flow of the stocker, fit right in a blaster tank and for 30 bucks new you cant beat it with a stick
 
Ues i will be running alky. i found one on amazon for 72 bucks. they have more on there at that price of anyone else is interested. i will post a link when i get back to my computer.