Pin clevis

[StevieN]

Hi does anyone know the size dimensions of the Pin Clevis on the rear master cylinder?

I have lost it and don't want to pay Yamaha a fortune for the part so was going to check ebay if i had the size of it

Length, Pin thickness and head thickness please

Cheers Guys

StevieN

 

[Awk08]

when i order gsxr parts for my rear brake kits, they sometimes come without that pin, i get them at any local hardware/home/surplus store and cut them to length, they usually require me to drill the existing holes to the next size, but works great

i cut them at the second cotter pin hole, leaving the first one for the perfect length

i know you're in the UK, but here's the one our home stores carry....
Shop The Hillman Group Clevis Pin - Adjustable 1/4-in x 2-in at Lowes.com=

this would work also...........

Go Kart Brake Throttle Rod Clevis Pin | eBay

 

[StevieN]

when i order gsxr parts for my rear brake kits, they sometimes come without that pin, i get them at any local hardware/home/surplus store and cut them to length, they usually require me to drill the existing holes to the next size, but works great

i cut them at the second cotter pin hole, leaving the first one for the perfect length

i know you're in the UK, but here's the one our home stores carry....
Shop The Hillman Group Clevis Pin - Adjustable 1/4-in x 2-in at Lowes.com=

this would work also...........

Go Kart Brake Throttle Rod Clevis Pin | eBay

Thanks man ye there is loads on ebay but just not sure on size, but here is a link to the one i was going to buy please tell me what you think??

clevis pin 24mm x 8mm x 12mm & with split pin | eBay

StevieN

 

[Awk08]

/\ i think that would work, hopefully the 8mm is the pin diameter ?
as i remember having to ream the hole slightly for a 10mm bolt and nylock nut i used in a pinch once

 

[sicivicdude]

Something in my brain is saying that the pin between the pedal and master clevis is smaller in diameter than M10. I am thinking M8 but I can measure this afternoon when I get home from work....

 

[StevieN]

/\ i think that would work, hopefully the 8mm is the pin diameter ?
as i rmember having to ream the hole slightly for a 10mm bolt and nylock nut i used in a pinch once

Yes its 8mm definitely as i email the seller, thanks AWK good man!

Something in my brain is saying that the pin between the pedal and master clevis is smaller in diameter than M10. I am thinking M8 but I can measure this afternoon when I get home from work....

Thanks for your help man its much appreciated ;-)