PB front hydraulic brake setup

[militaryblaster]

Does anybody have this, know anybody with it, or know anything about it besided you need aftermarket a-arms? I really want front hydraulic brakes and this seems like it would be the easiest thing. opinions on it?

http://www.factory7atv.com/PBbrakes.htm

 

[djack12]

you could find cheaper on ebay. try and find a used set up off a 03-up blaster.

 

[militaryblaster]

Yeah, I could do that.

 

[militaryblaster]

Do you know what all parts I`d need? Are the spindles, a-arms, ball joints the same?

 

[89custom]

yeah have fun with paying 600 bucks for just fronts. i paid 125 for front and rear + i think like 60 for new cables for front and back.

 

[djack12]

this is what i would try to do. get the folling parts off an 03-up blaster

a-arms
spindles,
hubs
rotors
calipers
master cylinder
brake lever
lines


if you got all that all you would have to do is take off your front end, and slap that one on. run the lines, and bleed the system.

 

[militaryblaster]

Your sure this is all I need and not too much or too little?

 

[djack12]

thats everything off the front end minus the shocks.

 

[militaryblaster]

How are the a-arms any different?

 

[djack12]

um they are the same, but the 03-up have a bracket to hold the hydro lines

 

[militaryblaster]

My dad is a welder so I`ll just have him make something. Thanks for all the info.
I am broke so I need to keep it as cheap as possible.

 

[djack12]

its nbot going to be cheap at all

 

[militaryblaster]

I`ll just get a part at a time.

 

[djack12]

good idea. im sure if you look on ebay there will be something. there is also a DIY that converts to hydro brakes. i think you use banshee and warrior parts.

 

[yamaha blaster]

Ya man thats what I will being doing to mine cause I really hate the drum brakes cause where I ride its allways wet and I need the best brakes or I just might ask my parents for the parts in may on my birthday.

 

['blanshee'man]

I`ll just get a part at a time.

Ya thats what i did took me about 2 months to get the whole set up but only cost me 55$ for front warrior and 30$ for a warrior carrier and rear set up