Parting out an entire 1991 Yamaha Blaster

dharbeck

New Member
Dec 13, 2007
420
3
23
NE
Everything is for sale off of this thing. PM me with what you need and make me an offer. This Blaster is stock. It has a bad transmission. and the left case has been welded but still works fine.

I have basically everything left except the following parts.

Rear brake caliper is SOLD
Rear skid plate is SOLD
Fron Wheels are sold
 
I am not sure. Make me a reasonable offer. Again, the tranny is broke and the left case has been welded. The engine ran but the piston looks worn it could probably use a rebore.

I am not sure what it is worth so I was going to throw it on ebay and let the market dictate the price.
 
ill take hood and front fenders (maybe..depends on price)

pm me the price with shipping please =D
thanks
 
As stated in my first post the rear brake is gone. PM with an offer on the hood and fenders
 
do you have the oil canster thing that sits in the back kinda below the seat??
 
i need a price on just the left front fender, one footpeg, the front right brake cable, oil cannister, and rear grab bar, this would all need to be shipped to 60941 let me know i can pull the trigger today for the right price!
 
regal, all parts except oil tank foot peg and brake cable are sold. PM me a fair offer and I will let you know. You hooked a friend of mine up with bumper and grab bar so I will work with you. I have ne of the chain rollers to but it is a little worn and sloppy

Thanks
 
Pretty Much all sold. 89 custom... 91 Blasters never had hydro brakes. So again, I have no rear brakes at all.