Part Identification??

[Nitrotate]

Ok guys so I have not had a whole lot of exposure to different types of pipes so I THINK this is an FMF due to the shape but do you guys know if there are any other pipes that are shaped like FMF's? I haven't noticed any identifiable markings on it. This is the pipe that was with the blaster in a million peices when I got it, but it has a stock pipe. Seems odd that you would keep the stock pipe and put an FMF silencer on...

And here's another oddity, anyone recognize these hubs?? What year did they use these???? And do they just use bolts as lugs or are they missing some studs? The weird thing is that the holes for the lugs are just straight cut holes not tapered to press studs in or anything...

Thanks to any that have ideas about these.

 

[Racer X]

thinking the exhaust is stock but the Dg i just took off looked more like the one in your pic then the Fmf i got...i dont know about the hubs

 

[stephen12091985]

yea thats not an fmf i have one and it looks nothin like that

 

[Nitrotate]

hmmm. so I wonder if maybe it's a DG then... I'm going to take a closer look at it when I get home and see.

 

[jfblasterboy65]

idk if thats a dg either though cuz i have one on my blaster right now and it looks a lil different unless its missing the cap on the end cuz mine says dg and has a cap...

 

[89custom]

it looks like a dg silencer. the hubs, never seen them. look like they came off a chinese quad.

 

[stephen12091985]

looks like someone made them hubs there self

 

[Nitrotate]

looks like someone made them hubs there self

LOL, that's kind of what I was thinking but not sure who would go to the trouble to make hubs since they have the matched splines on the inside??

Oh well just curious cause I'm putting some banshee hubs on it anyway since I have an extra pair laying around.

 

[wolf1]

the pipe looks like something that came off a 90's era dirtbike

the hubs are probably off a different atv but fit.

some of the suzuki lt250 quadracer parts will interchange.
like the swingarm off an lt250 will bolt up perfectly to the yamaha blaster and it's 2 inches longer and made of aluminum.

 

[DUALSTROKE]

That is deffinately a DG silencer.I have not seen those hubs before.I do have a set of shee hubs also I'll throw in the box if you could use them.

 

[blaster20001]

the hubs look like there off a older 3 wheeler and thats not a dg silencer it looks almost like a dyno port cause it has no end cap

 

[dharbeck]

Wait what? an LT250 Swingarm will fit a blaster? I need to see pictures of this.

 

[blasterman87]

thats what i want to hear about ..lt250 swinger

 

[Nitrotate]

That is deffinately a DG silencer.I have not seen those hubs before.I do have a set of shee hubs also I'll throw in the box if you could use them.

I have some banshee hubs that I was going to use but they are the larger diameter ones, are the ones you have large or small diameter. The smaller ones might actually work better for me.

 

[liljatownboy]

i think it is a DG also

 

[Nitrotate]

i think it is a DG also

Yeah I'm starting to think DG also. I have a similar thread running over on Banshee HQ and they are saying the same mostly.

One guy told me that some dude on craigslist told him it was a "Tummy"...=))

 

[89custom]

hold on, lt250 swinger? how much longer and does it acualy work?

 

[nd jat]

I'm curious about the rear swinger too. +2 inch from a stock blaster all aluminum. that would be cool. thinking there might be slight modding, that would be worth while.