P&P and Milling head

[Blaster200boy]

Well for Christmas, I am planning on getting a new top end for the blaster. Making it next bore size up. While I have the cylinder and head off, should i get the jug a P&P and the head milled maybe .10? From wildcard, i was thinking of getting either the Trail Port or the Agressive Trail/MX port. Which one should i get? I do both types of riding. Do I have to jet differently once i Get these mods? Plan on getting Uni air Filter with lid removed. Getting Bills pipe as well jetted to a 280 or 290 with a Pilot jet of 35 or 40. Do I have a good plan?

 

[yb200]

Well for Christmas, I am planning on getting a new top end for the blaster. Making it next bore size up. While I have the cylinder and head off, should i get the jug a P&P and the head milled maybe .10? From wildcard, i was thinking of getting either the Trail Port or the Agressive Trail/MX port. Which one should i get? I do both types of riding. Do I have to jet differently once i Get these mods? Plan on getting Uni air Filter with lid removed. Getting Bills pipe as well jetted to a 280 or 290 with a Pilot jet of 35 or 40. Do I have a good plan?

you best bet is to pm a builder and tell them what you have or are planing to do and they will offer a setup that will work best for you

 

[UniRacing]

Yep pm a tech and explain what you want..^

 

[Blaster200boy]

you best bet is to pm a builder and tell them what you have or are planing to do and they will offer a setup that will work best for you

Will Do! Thanks yb! I was told when I signed up for this that wildcard does really good work for the money.

 

[UniRacing]

You was told right..

 

[yb200]

i think i also am going to have wildcard do my work

 

[UniRacing]

Same here..but not for a few weeks

 

[Blaster200boy]

i think i also am going to have wildcard do my work

Well i wonder how much it is for shipping? I live in Indiana. Far away from where Wildcard is located.

 

[stephen12091985]

you might wanna go with a better exhaust setup tho

 

[yb200]

Well i wonder how much it is for shipping? I live in Indiana. Far away from where Wildcard is located.

around 20.......................

 

[stephen12091985]

Well i wonder how much it is for shipping? I live in Indiana. Far away from where Wildcard is located.

if you get one of those priority flat rate boxes from usps then thats how much shipping is

 

[Blaster200boy]

around 20.......................

For my whole cylinder jug and head? Damn i thougt it would be like $40

 

[yb200]

For my whole cylinder jug and head? Damn i thougt it would be like $40

i guess it all depends how you send it and how fasy you want it to get there...usps parcel should be 20 or under and take 2-9 days

 

[Blaster200boy]

you might wanna go with a better exhaust setup tho

Friend of mine is selling the whole exhaust setup for $50. Really nice condition, just some surface rust in small areas. I thought Bills Pipes are a mid ranged pipe.

 

[Blaster200boy]

i guess it all depends how you send it and how fasy you want it to get there...usps parcel should be 20 or under and take 2-9 days

Heck maybe i can have my dad take it with him to Salt Lake City when he flies in (He works at UPS) Then i can have him ship it to Wildcard. lol jk Probably just send it USPS flat rate thing.

 

[liljatownboy]

an whole engine cost me 56 to shipp so that should jusdt but around 20 like he said if you can fit in in that box go for it

 

[yes se-r]

hey not to be a dick but your sig is huuuge i had to reduce mine to a smaller size b/c ppl apparently biotch about sig size. anyways get whatevers in your budget. if you can afford the better stuff go for it. if its for xmas ask for the better and settle for the lower end..

 

[Blaster200boy]

hey not to be a dick but your sig is huuuge i had to reduce mine to a smaller size b/c ppl apparently biotch about sig size. anyways get whatevers in your budget. if you can afford the better stuff go for it. if its for xmas ask for the better and settle for the lower end..

Ok I will change it! Well my parents spend around $300-$325. Grandparents and uncles and aunts and all other family i get around $400 all together!!!!!!!