Opinion on jetting

[cam6489]

Fresh rebuild complete +3 Vito stroker crank, new crank bearings and seals, wiseco piston .30 over, toomey b1full exhaust, uni air filter fresh cleaned and oiled, exhaust port cleaned up and polished, 330 main jet middle clip, stock pilot. Lid on with vents. Fresh leak test 32:1 maxima 927. Opinions on 330 jet being too big. Should I try the 310? No plug chop yet. Intake and exhaust ports blended also

 

[Blaaster]

Run the jet you have in until you finish break in procedure.

2 tanks of gas at no more than 3/4 throttle will never put you on the main jet.

When done, plug chop the #330 then to see where you are, it never hurts to start big.

 

[cam6489]

I felt the same just wanted reassurance