OMG WTF happened help!

[ATVkid2002]

ok so me and my dad friend was riding and well he was on the blaster and, it died like it was out of gas, so i turned around seen that he was stopped and i said hold the bike, i try to start it no luck, but its super easy to kick over i can spin it over with my hand,??? oh and also there was a really wierd smell after this happened when you kicked it over.


i need to know what happend, please tell me ill be checking this ever 15 mins
X(X(X(X(X(X(

 

[phragle]

What are the results of the compression test?

What are the results of the leak down test?

 

[ATVkid2002]

didnt take em yet. we might do it tomarrow i thought maybe a piston, or somthin.

 

[phragle]

If it spins over that easy it probably is, HOWEVER, it does no good to fix something untill you figure out why it broke and address the primary problem (unless you just like throwing money away)

does it have an airleak?

was it worn beyond specks?

did it suck dirt?

 

[ATVkid2002]

well idk but when it died it smelled like burnt anti freeze, it started again then died. and we had to tow it back, it kicks over super easy. there is no hard spot on the kicker at all, tryed to compression start it, nope just sounded like it was boggin out.

 

[phragle]

Read, learn, invest in diagnostic equipment. Once you understand something, you will know why it broke.

 

[ATVkid2002]

yep well we gunna try it tomarrow, or it might be a while cause well dad needs tires for winter, and i dont really got the money but w.e but thanks man, i might need you help later.

 

[justtwistit]

was there white smoke?

 

[ATVkid2002]

yea a small bit of it then nothing came out.

 

[scotj77]

before you take anything apart you should make or buy a leakdown tester from holeshotman like 35 bucks super cheap. this way you will know if it was an airleak that caused this problem. then a compression test. also do this before you take anything apart. you need to find out where you are at before you try to figure out where you're goin.

 

[darederek]

b4 u pull top end off check reeds i betcha thats what it is

 

[ATVkid2002]

ok well i dont got the money for a leakdown, so yea it might be a while. but thanks for the info. i got compression tester. and i get check the reeds.

 

[scotj77]

b4 u pull top end off check reeds i betcha thats what it is

yeah but he needs to doa leakdown test before pullin the reed cage. I guess he could inspect them through the intake boot by takin the carb off.

 

[ATVkid2002]

yea but dude scot i dont got a leak down tester, and itll be a while till i get one, i just ordered a go pro cam, so well yea, ill try anything that dosnt involve money

 

[scotj77]

if you own two stroke you HAVE to get a leakdown tester. I know you don't have the money but it should be the first thing you buy.... even before you start buying parts to fix it. there are a lot of dudes on this forum from Pa. start a tread asking if anyone near you has a leakdown tester you could use. if you don't do the leakdown before disassembly you won't know if an airleak caused the meltdown. and do the compression test you should be in the 100-120 range. if you don't know how you kick it over until the neadle stops climbing while holding the throttle open

 

[ATVkid2002]

ok yea we gunna do the compression test tomarrow

 

[blastapole]

If you smell antifreeze then your headgasket is blown.

 

[scotj77]

^^^^^^^^^^^^^^^^^^^^^^^^^
I thought we were talkin about a blaster here

 

[phragle]

Dude... there are a few threads on here about building a leakdown tester CHEAP! You could probably build 5 leakdown testers for less than the price of the piston you can destroy with an airleak.

 

[Awk08]

where you at "in d maountains" of PA. ???????
maybe you can borrow my leakdown tester
PM me