oil question
- Thread starter ksmith88
- Start date
Use 10w-30 gear oil. The manual suggests Yamalube 4. You can use any good brand 10w-30 gear oil. I use Bel-Ray Gear Saver, works wonders
There is a little sight glass down below there for proper level, don't overfill!! If you haven't changed it in a while do so. Any oil without friction modifiers in it, MUST say for "wet clutches" on bottle, gear saver MTL, even automotive ATF type F
on the bottom of the motor there is a drain screw undo the screw an be ready with a pan to catch the oil...
like hillbillyproud said 650 ml to fill an do not over fill on bit!
if overfilled it will come out the breather vent an all types of stuff theres a sight glass to make sure you are correct!
also gear oil is measured diffrent instead of 10w-30 I think its 80 weight
I personally use belray gear saver a lot of people on here do it works wonderful! ( I believe it is 80 weight)
like hillbillyproud said 650 ml to fill an do not over fill on bit!
if overfilled it will come out the breather vent an all types of stuff theres a sight glass to make sure you are correct!
also gear oil is measured diffrent instead of 10w-30 I think its 80 weight
I personally use belray gear saver a lot of people on here do it works wonderful! ( I believe it is 80 weight)
