What does the oil injection mix ratio come out to be. so that when i block it off i can start there and eaither got leaner or richer thank you. also anyone with it blocked off could you say what you are mixing at
Oil injection!
- Thread starter Speiser15
- Start date
Everyone on here mixes at 32:1 there is really no telling what tbut i he pump mixed at but i heard it's somewhere around 20:1
its advertised at 20:1
32:1 is a common mix, If the oil (like some amsoil products) specify differently, I would use their recommendation. Remember that changing the mix will change jetting requirements as well since you will get less fuel to the cylinder with the same amount of actual fluid flow
32:1 is a common mix, If the oil (like some amsoil products) specify differently, I would use their recommendation. Remember that changing the mix will change jetting requirements as well since you will get less fuel to the cylinder with the same amount of actual fluid flow
If you change from 20:1 to 32:1 it calls for at least one size bigger main jet,
I would be taking it up 2 sizes and doing a plug chop to get it right.
Far better to be too rich than too lean.
I would be taking it up 2 sizes and doing a plug chop to get it right.
Far better to be too rich than too lean.
