oil injection

[billysblaster]

can i run pre-mix without uding the block off kit anf just bypass the pump

 

[Jrodfolyfe]

ugh i think so just make sure you turn off the pump or disable it hopefully im right ill find out

 

[Jay]

you can bypass the pump but you need to pinch the lines off and make sure you plug the carb inlet off.It is not the right way but it will work for you,there is diy on here how to do this.

 

[billysblaster]

thanks guys my wife said no more fourwheeler money lol. znf you are right we are saved through the grace and resurection of the lord jesus

 

[Jay]

Well plugging the carb will work cork or what ever.the pump you will need to remove and cap with cap and high temp silicone temp or just pinch off lines.

 

[blasterdad]

can i run pre-mix without uding the block off kit anf just bypass the pump

You don't have to buy a kit, just take the oil pump off and remove the plastic gear, then the put the pump back on & make sure you plug the carb really good where the oil line goes into it. The kit isn't very much & has the plugs & everything else ya need. That way, when you're done, ya get to have fun smashing the damn thing with a hammer! lol