Oil injection for block off for noobs?

xxRyBlastMDxx

New Member
Nov 19, 2009
85
1
0
Howard County
Just wondering if anybody on this forum has the time to make a picture by picture, step by step, Do It Your Self guide to installing the oil injection block off kit.(Do your best). I got the kit the other day and cant figure it out for my life, even with the DIY already posted. I would greatly appreciate it if somebody made an easy tutorial and im sure tons of other people would. I dont know if its rude to ask this or not cuz its alot of work im sure, but yeah. thanks if u can.
 
here is exactly what you do:

1. Drain your transmission oil.

2. Remove the entire clutch cover.

3. flip over the clutch cover and remove the oil injection cover.

4. Remove the pump and replace it with the little metal cover and gasket included in the kit.

5. Put the oil injection cover on then put the clutch cover on with the included new gasket.

6. Using the included rubber cover, remove the oil line from the carb and cover up the brass nipple with this cover

7. remove the oil injection tank from the rear of the quad and unplug all the wires.

8. Drain all of the gas from the quad and replace it with premix.

9. RIDE!!!!!