oh boy.. i think i have a problem lol.

[Stryder917]

well.. i got home from work yesterday.. and i jumped on my blaster and rode for a bit, and i landed really rough on a jump.. well. i rode really easily home, cuz where i happened to be riding, there's a noise ordienence after 930.. BUT.. when i got in my driveway.. i railed the throttle back, and my axle kicked to the side a little bit.. and i could feel when i punched the throttle that it kept kickign to the side... i gotta take the axle off and look at it yet.. but im very, very busy right now. .and i was wondering if anyone wanted to troubleshoot for me.. im like 99% sure my axle is nottt bent/broken or anything..

what could it be...suspension is my gray area.. i dont know a lot about it other than shocks and a-arms.. im a motor guy :/
i was thinking i might have f*cked my bearrings up? but im not sure... soemone wanna shoot me some ideas before i attempt to pull it apart (saves me a little bit of time and effort, cuz im swamped these next 2 months)

 

[yb200]

put it up on a jack and see if the axle wobbles i bet you axle bearings are shot

 

[Stryder917]

thats what i was thinking myself...
i just wanted to see what other people thought before i did anything, thanks man

 

[2000blasternewb]

coulda broke the carrier bolts also

 

[245stroker]

axle or swingarm bearing or both

 

[Stryder917]

axle or swingarm bearing or both

if its a bearring, it's gunna be the axle, i know the swing arm is fine for sure --- and

yeah.. imma check on the carrier bolts as well.. i forgot bout that

 

[Mborso1029]

i'd say check your tensioners... i had this happen to me on a warrior everytime you punch it feels like the rear end was coming out front under you on one side. it looked tight but i took both tensioners off and the one side the nut was stripped out on the back side of the tensioner

 

[HawaiianBassHed]

hm, my kids LT the back seems like it wants to pass you going from left to right like when doing fish tales but it does it going straight even on asphalt... I shimmed a washer between the motor and frame (the motor is used as a swingarm on these).... think it helped but had throttle sticking issues and didn't ride much lol. we'll see tomorrow if changing the cable helped or if the slide is getting stuck