I have decided to upgrade the ignition system on the blasty since I went through three coils and two plug boots, One of the coils was brand new but only lasted half a season. Not sure what is up with that. I tore my wiring harness apart and checked continuity on the wires also check grounds, Stator, and all was good. Only conclusion was maybe getting too hot and breaking internally??? But not sure all I know every coil that went bad Both the primary and secondary went on all three of them. So Instead of pissing around with another junk stocker coil and wires and possibly getting stranded on the mountain, I decided to do some research and talk to a couple members who are currently running this setup! Dually gave me great info, and also is hooking me up with pics on how he mounted his as these can fit in the stock position with some modification But I am going to mount it under the hood, keep it away from the heat as much as I can.
Now to the great part!... so I emailed Nology and talked to- Jeff Kline of Nology Engineering Inc, Owner CEO, as I couldn't find a part number anywhere, and really didn't want to pay Project Blaster prices. I must of talked to him for a good 45 minutes or so, great down to earth guy looking out for us little people! He not only gave me the part numbers, He sent me a 2 sets of Hotwires, and coil, and sliver tipped sparkplug, (YES The whole entire System) for No Charge! All he asked was that I do a write-up and give my honest opinion! Now that is a freekin hook-up! How could I refuse?
I decided to donate the other set to the Dragger build! Should help with getting the power to the wheels!
The coil is backordered but should be here next week or so, Then a quick install- yes I'll have pics, not sure about a vid- then a ride report!
Thanks JEFF!
For now here is what came today VVVVV 8.1 mega pixel HD camera sucks at close ups!
Spark plug This is equal to a b8eg NGK but has a silver electrode tip
Now to the great part!... so I emailed Nology and talked to- Jeff Kline of Nology Engineering Inc, Owner CEO, as I couldn't find a part number anywhere, and really didn't want to pay Project Blaster prices. I must of talked to him for a good 45 minutes or so, great down to earth guy looking out for us little people! He not only gave me the part numbers, He sent me a 2 sets of Hotwires, and coil, and sliver tipped sparkplug, (YES The whole entire System) for No Charge! All he asked was that I do a write-up and give my honest opinion! Now that is a freekin hook-up! How could I refuse?
I decided to donate the other set to the Dragger build! Should help with getting the power to the wheels!
The coil is backordered but should be here next week or so, Then a quick install- yes I'll have pics, not sure about a vid- then a ride report!
Thanks JEFF!
For now here is what came today VVVVV 8.1 mega pixel HD camera sucks at close ups!
Spark plug This is equal to a b8eg NGK but has a silver electrode tip
