No Throttle

[Johnston Repair]

I just had my top end rebuilt with a new weisco piston and bored cylinder. Now that it is all together it starts like a charm but will only idle, anytime I touch the throttle it kills it?

What could be causing this?

Thanks

 

[Surfrjag]

tors? parking brake sensor?

 

[EvilElvis]

or maybe reeds?

 

[Braaaptor]

What year Blaster? TORS system is likely to blame. Search around on here a little and you'll see how to get rid of it.

 

[Johnston Repair]

It is a 1993 Blaster... How do you check the parking brake sensor or the reeds?

I will do a little searhing abou the TORS system becaue I dont know much about it.

 

[Braaaptor]

Here 'ya go!

http://www.blasterforum.com/do-yourself-20/how-remove-your-tors-655/

Get rid of the whole works; the TORS system causes nothing but problems and it won't hurt the Blaster in any way to get rid of it.

Here's how to get the 'brick' off of the top of your stock carburetor once all the electrics have been unhooked:

http://www.blasterforum.com/do-yourself-20/aftermarket-carburetor-cap-idle-screw-install-22174/

 

[Surfrjag]

remove the parking brake sensore and disconnect the tors box thats under the hood. its the one with the larger size plug on it.

 

[Johnston Repair]

After I unplug and remove my TORS system can I run the Quad without the conversion kit?

 

[Surfrjag]

you can unplug and remove the tors box under the hood but you need the tors unit on the top of the carb until you get the conversion. i have always run it the way i described.. just unplug it.

 

[Johnston Repair]

Okay Thanks! My problem is solved It runs Great!