Well my blaster was acting up today it was breaking up in the top & kinda bogging out. So i pulled carb off cleaned it pulled reed cage out lol & noticed a broken reed. I replaced it with stock boysen reeds & noticed i didnt even have reed stops. So heres the deal my buddy has a ysf200 also with fmf exh lid off & jetted I on the other hand have stock exh with just lid removed & jetted. With the reed stops out that i didnt even now where not there i would always pull hard away from him with his reed stops put on my cage i lost all my low end & now he pulls on me lol. Any ideas ???
No reed stops ??????
- Thread starter 97ysf200
- Start date
without the reed stops the reeds flow a little better if that makes sense, a lot of people don't even use reed stops
Reeds,
Talk to Tony Doukas at TDR or Banshee Depot about reeds. He can build anything you want. We used to have him build a set of reeds for the racing outboard that were good for 5-6 passes. But good for 20 extra hp on a v6. On the other hand he can build a set to last a very long time. You will be surprised at how a reed works at high RPM.
Talk to Tony Doukas at TDR or Banshee Depot about reeds. He can build anything you want. We used to have him build a set of reeds for the racing outboard that were good for 5-6 passes. But good for 20 extra hp on a v6. On the other hand he can build a set to last a very long time. You will be surprised at how a reed works at high RPM.
I use the boysen to stage reeds without the stops, been through two top end rebuilds and the reeds are still in great shape.
Similar threads
