here ya go bob, all switches only require 2 wires, the only place the new harness will require 2 wires is from the front switch to the rear switch, one being hot all the time to feed the rear switch, and one being the switched wire from the front switch, once they leave the rear switch for the tailight they can be the same wire to power the tail light from either switch, then ground the other wire of the light to a frame ground
also, which wire you feed on either swich does not matter, it only makes or breaks the circut
1....power all the time, i'd come off the feed to the stock headlight switch, looks to be the yellow w/ red stripe in my manual
2....front switch
2a...rear switch
3....tail light
4....frame ground
AWESOME! I knew it had to be simple! The ground for my light is the studs and i have it bolted to the aluminum box which is bolted to the fram so i do believe I'm good but well see! Max rep for Ya Jo-Jo!
