Hey, my back right rim keeps spinning inside of my tire, I took it and added air to it, so its holding air, but if i get down on the throttle the rim spins but the tire dosent...what can i do??
Neep help with rear tire
- Thread starter peacher213
- Start date
Its gotta be something with the bead, but i cant think of anything that would cause that. Def post a vid
See if you can break the bead and clean it up. Break one side of the bead at a time. Then, once you clean both bead seating surfaces on the rim real good, use either a good compressor or a CO2 tank to re-mount the tire. You want to use a bunch of pressure to pop that bead into place. I'm not sure of the correct amount to use on an ATV tire.....but usually you use a lot more than normal inflation pressure. If that doesn't work, then have a professional re-mount it for you.
If that STILL doesn't work, maybe you need beadlocks. If you can't afford real beadlocks, there are redneck ways to keep the beads from spinning on the wheel. Screws behind the bead and into the bead to hold them in place. It requires more attention to air pressure, because it won't hold air quite as well.
If that STILL doesn't work, maybe you need beadlocks. If you can't afford real beadlocks, there are redneck ways to keep the beads from spinning on the wheel. Screws behind the bead and into the bead to hold them in place. It requires more attention to air pressure, because it won't hold air quite as well.
Hey sorry for a late reply. I completly forgot 
I took the tire to the shop. It just had mud and water in the bead....cost me a whopping 4dollars 
I took the tire to the shop. It just had mud and water in the bead....cost me a whopping 4dollars 
Ive never heard of this on an atv but i know if you put aluminum rims on a vehicle you can run into this problem. But glad you got it fixed.
i thought my clutch was slipping when it first started...b/c it revved when i got down on it hard..but it was just the rim spinning lol
