need some help

[frankin blaster]

does any one know the bolt pattern for a blaster like 4x100 4x125 4x?

also does anyone know the bolt pattern for a lt 230 4x100 4x125 4x?

reason im asking my blaster has lt 230 hubs all the way around another stupid thing my brother did and am running lt 230 rims currently front and back

also would love if someone could hook me up with front wheels with decent tires for a blaster if i find my hubs wolnt work with the blaster spindles

 

[frankin blaster]

so far i found out the blaster
front is 4x156
rear is 4x100
cant find anything on the lt 230 can anyone shed light on this for me

 

[Awk08]

stock blaster bolt patterns are 4x156 front and 4x100 rear

you can cross reference other bolt patterns here..........

ATV Bolt Pattern Guide - ATV Wheels

 

[Awk08]

looks like 230qs is 4x130 rear according to the aboved linked site

 

[frankin blaster]

thanks and yep lt 230 is 4x166 in front and 4x130 in back thanks for the help i hope the bearings are about the same i know the blaster is smaller over all i should test fit the old bearings to see if i can still use the hubs i have or i guess spend another 80 on hubs and bearings

 

[Awk08]

chances of the bearings being the same are pretty slim, but hubs can be had for way less than $80
not sure i'm following you exactly, but front or rear yamaha hubs can both be had for around $35

 

[frankin blaster]

i origionally though i had blaster hubs till i started on the front end and noticed the part #'s i had didnt match up to blaster part #'s so i traced the part #'s i had back to a 89 lt 230 quadsport this is where i got mad... i ordered front wheel bearings for a blaster the front bearing fits in fine but the back bearing is to small i still have the old lt bearings so hopefully the back bearing will slide over the shaft... then ill order new bearing yet again

 

[frankin blaster]

hey awk i just want to make this known with my 230 hubs i test fitted my old 230 bearings on the 03-06 blaster spindles... come to find that the outer race is bigger which i already knew that but here is the important part the inside race of both 230 and blaster front bearings are exactly the same size so im in the clear and can use my old hubs with out having to buy new ones just need new 230 bearings now

 

[Awk08]

hey awk i just want to make this known with my 230 hubs i test fitted my old 230 bearings on the 03-06 blaster spindles... come to find that the outer race is bigger which i already knew that but here is the important part the inside race of both 230 and blaster front bearings are exactly the same size so im in the clear and can use my old hubs with out having to buy new ones just need new 230 bearings now

cool, that saved ya a few $$$

 

[frankin blaster]

yeah got really lucky