need pictures of tail light mounting

Mine is 03, It mounts to grab bar they're are two rubber spacers that go into holes of mount with washers on both sides of rubber and a metal spacer that runs through the rubber. Then a bolt/screw goes through that. I'll upload a pic
 
mounts to the grabber, but it gets in the way doing wheelies so i moved mine here
5207-100-1064.jpg

5208-100-1068.jpg

5209-100-1066.jpg

^^ also, i knwo that the wires were messed up in that pic, i fixed it
 
This isn't a stock grab bar, but the light is mounted pretty much the same way.

28KGrHqFg0E2ehyzNeHBNn0V280Mw_12.jpg
 
i just ripped off my stock bar bc it got bent to sh*t from wheelies. i have a 03. the lights did not get in the way on wheelies i know that for a fact bc i wheelie my bike all the time and scrape the bar alot. im searching for a stock bar now. aftermarket bars are alot shorter from stock. well the common ones and theyre mostly off set. if u wheelie passing ur balancing point with the after market bar im talking about, ur pipe will scrape the ground or worse the bike will flip on u. stock bar is thin, heavier, bends easy, but its safer to have that bar then those aftermarket ones i saw. i ordered one and sent it back.