can somebody post pictures of how their tail light bracket mounts to the frame? i've got an 03.
Thanks,
David
Thanks,
David
need pictures of tail light mounting
- Thread starter coggonbrien
- Start date
Mine is 03, It mounts to grab bar they're are two rubber spacers that go into holes of mount with washers on both sides of rubber and a metal spacer that runs through the rubber. Then a bolt/screw goes through that. I'll upload a pic
mounts to the grabber, but it gets in the way doing wheelies so i moved mine here
^^ also, i knwo that the wires were messed up in that pic, i fixed it
^^ also, i knwo that the wires were messed up in that pic, i fixed it
i just ripped off my stock bar bc it got bent to sh*t from wheelies. i have a 03. the lights did not get in the way on wheelies i know that for a fact bc i wheelie my bike all the time and scrape the bar alot. im searching for a stock bar now. aftermarket bars are alot shorter from stock. well the common ones and theyre mostly off set. if u wheelie passing ur balancing point with the after market bar im talking about, ur pipe will scrape the ground or worse the bike will flip on u. stock bar is thin, heavier, bends easy, but its safer to have that bar then those aftermarket ones i saw. i ordered one and sent it back.
demo ^^, i got my uncle to bend me one out of steel and he drilled holes for mounting holes, looks the same as the stock one but its a hair longer
cool.. ive been searching for a durable bar thats as long as the stock bar or longer that could mount the light. but no luck yet...
if you know someone that has a pipe bender and some steel, get them to make ya one, then just drill 2 holes, and use the stock rubber mounts
Similar threads
