Need options for more power/performance

[lucknuts]

What's up people. I was on here a year or two ago when I rebuilt this junk I got from a guy. Gave me a nice winter project and ya'll were amazing and lots of great info on here. Completely rebuilt the engine, bunch of electrical, tors yada yada - very resourceful. On that note - I'm looking for some idea's again.

2004 Blaster
Toomey B1
Stock Carb
No airbox lid
Stock pilot / 320 main (it's colder right now in WI)
TORS Delete/Removed
Complete HOT RODS bottom end kit
Cylinder bored and new piston from OConner Racing (thanks awk)
vForce 4 Reeds

Not sure what else to list cause it's been a bit. I want to do a bit more with it since on a on/off break from construction and this gives me a winter project to get back riding smooth when it gets warmer.

What upgrades do you recommend from here? Bigger carb? Different intake? Big bore kit? What's going be the next best thing for this project?

It definitely rips - keep investing or go on to a different rig?

Thanks!

 

[Awk08]

You should have had Ken port that cylinder and modify the head while he had it for the bore, that's where the power is, you know the #
and nothing makes you faster in the trails than suspension, all the power available is no good if you have to slow down for the rough stuff.

 

[lucknuts]

You should have had Ken port that cylinder and modify the head while he had it for the bore, that's where the power is, you know the #
and nothing makes you faster in the trails than suspension, all the power available is no good if you have to slow down for the rough stuff.

would ordering a big bore kit and having it sent straight to ken to port and modify be the right way to go? vito's is 3 weeks out. if that's where the rest of the difference is, i'll pull the plug on that before i leave for vegas