Need Help "HUBS"

[L.T.]

I am in desperite need of soome help I have the standert hubs on my blaster and need some one to give me some step by step info on how to change them with a bashee's hub's and is it possible. (Because I got new rims that came off a banshee) any help is appreciated! ps it is for the swing arm (Back hubs)

 

[blasterdude14]

its a direct bolt on all u have to do is just line it up
and just out of curiosity wat time is it over there?

 

[L.T.]

its a direct bolt on all u have to do is just line it up
and just out of curiosity wat time is it over there?

Thanks for the help did not know it was that easy./ It is now 08:30AM and there!

 

[blasterdude14]

dang its early out there glad i could help u out

 

[blasterdude14]

over here its 230 am

 

[L.T.]

One more Question dose it matter what YEAR banshee the hubs are from or all of them the same

 

[DUALSTROKE]

They are all the same.Try to get the newest you can but they are all thw same.

 

[L.T.]

They are all the same.Try to get the newest you can but they are all thw same.

Thanks appreciate it

 

[245stroker]

The '87-'88 banshee hubs ARE different. They used a weird bolt pattern for the first couple years that the banshee was built like 4/156 for the rear hubs. The '90 and up banshee's are all the same.

 

[L.T.]

The '87-'88 banshee hubs ARE different. They used a weird bolt pattern for the first couple years that the banshee was built like 4/156 for the rear hubs. The '90 and up banshee's are all the same.

So it will fit on my Blaster?

 

[4cfed]

yes they will fit on your blaster, just take the cotter pin out, and take the nuts off, remove hub, ( may need to tap off with a hammer) than you bolt the new ones on and re install cotter pins

if cotter pins break find a nail that will fit threw the holes for the cotter pins and then bend them, hell i stuck my honda 250x hubs on a blaster for sh*ts and giggles, had raptor hubs on the 250x and then put them on a blaster,

 

[Bartillious91]

ya the hubs off a banshee will work but not 89-90 hub cause there bolt pattern is 4x115

 

[kep3vin]

pin and one bolt real easy! might want to wire brush it and same grease or anti sieze for the next time u want to take it off

 

[blasterdude14]

why was this brought up from the dead lol