Need Help Fast

[impulse86]

While i still have it apart before it gets dark or rains , can sum 1 tell me if thi bent metal is suppost 2 be this way , and how i can remove it either way ive post pictures , the first 1 is inside the clutch basket the second the gear above the basket , thanks for the timely responce , phone call would also be helpful if you dont feel like typing 845 337 7941 thanks Brandon (look at the metal bent around the nuts)

 

[impulse86]

metal is bent down onto the bolt , folded in

 

[ron89]

i think thats supose to be there it help the bolts from coming loose..

 

[impulse86]

any clue how to take them off?

 

[ron89]

take a flat head/screw driver and push it down ??..

 

[Blasterb0y794]

its supposed to be like that
when i took mine apart i used a flat head screw driver and a hammer, bend it out, then rebend it after your done

 

[CC&Fabb]

i used am impact gun to get that nut off and that washer just came off with it. but i did the same thing as blasterboy^^^just bet it back with a screwdriver.

 

[89custom]

i broke mine so i just put some locktight on it. its fine.

 

[BlasterChris08]

hey impulse89 send me a pm i need help rebuilding my blaster. Also anyone know what kind of grease i use to put my whole quad back together like in the swingarm/engine bolt etc