Need gearbox help!
- Thread starter ruairiyblaster
- Start date
i'm stumped, only thing i know that even looks like those parts are the backing plate and rubber cushions between the clutch basket and gear, but how would they have come out/off and end up down in there ??
and the rubber cushions do not have holes in them ???
and the rubber cushions do not have holes in them ???
Yeah I don't have a clue the gearbox locked up and I was thinking the common gear selector shaft we had one there and went to put it in and these bits fell out.
Thanks for the pics awk
Thanks for the pics awk
well ill be a i have no clue it kinda looks like the rubber stoppers in the clutch but i dont know how theyd be there
mr. oconnor says thats the counter balance shaft gear ,plate, and rubber buffers, just like the clutch basket has, as you see.
it is held together with 3 rivets, which let loose,
ken says he inspects and resets them on every motor he does if he finds them loose.
and that you got very lucky it didn't wipe everything out,
you need to pull that clutch basket and inspect that, and all gears for collateral damage.
you will need a new counter balancer gear minimum.
and of course a good flushing of everything (tranny too)
to remove all the shrapnel
it is held together with 3 rivets, which let loose,
ken says he inspects and resets them on every motor he does if he finds them loose.
and that you got very lucky it didn't wipe everything out,
you need to pull that clutch basket and inspect that, and all gears for collateral damage.
you will need a new counter balancer gear minimum.
and of course a good flushing of everything (tranny too)
to remove all the shrapnel
part # 25 here........
2001 Yamaha Blaster 200 YFS200N Parts, 2001 Yamaha Blaster 200 YFS200N OEM Parts - BikeBandit.com
see the 3 rivets and backing plate, the rubber buffers are under there........
2001 Yamaha Blaster 200 YFS200N Parts, 2001 Yamaha Blaster 200 YFS200N OEM Parts - BikeBandit.com
see the 3 rivets and backing plate, the rubber buffers are under there........
here's a set of gears for $20 + shipping
of course i'll help you with shipping to you
holler
06 Blaster 200 Misc Gear Set Gears 26 | eBay
of course i'll help you with shipping to you
holler
06 Blaster 200 Misc Gear Set Gears 26 | eBay
Last edited by a moderator:
I was just going to say counterbalance gear.But Im a day late.lol If you have a hard time finding one i got a few.
Thanks alot ill get the clutch pulled out and clean all the parts what's best to clean them with ? And is there any good disassembly vids ?
Thanks again
Thanks again
kerosene/deisel is good for cleaning.
i don't know any disassembly vids ?
watch these in reverse..........
full series....
http://www.blasterforum.com/engine-13/kor-engine-assembly-no-crank-puller-needed-51169/
i don't know any disassembly vids ?
watch these in reverse..........
full series....
http://www.blasterforum.com/engine-13/kor-engine-assembly-no-crank-puller-needed-51169/
Last edited by a moderator:
It is not a pretty sight when that gear pukes itself.
If that's the only damage is the gear, consider yourself lucky. I don't know if on mine the gear took out the bearing or vice versus, also damage to case, and minor nicks to clutch/crank gears.
I/maybe all would benefit from what Ken does to the gear. This might be a very important preventative maintenance procedure when someone takes the clutch cover off. I really don't want to pay $70+ for a new one, but can't afford to have a used one fail.X(
If that's the only damage is the gear, consider yourself lucky. I don't know if on mine the gear took out the bearing or vice versus, also damage to case, and minor nicks to clutch/crank gears.
I/maybe all would benefit from what Ken does to the gear. This might be a very important preventative maintenance procedure when someone takes the clutch cover off. I really don't want to pay $70+ for a new one, but can't afford to have a used one fail.X(
