My ride is running great.

[Sruiz67]

I bought it for 700 in march and after doing a top end, reeds, and rebuilding the carb and getting all the leaks sealed up and tors removal my blaster is running. I kinda got tired if working on it cause I couldn't get it running right a couple months ago. But today I got out there and adjusted some stuff in the carb and it fired up. Seemed to be bogging out when I would give it gas so I pulled the air box cover off and the thing is now running like a beast. It has plenty of power and is giving me some white smoke out the pipe but not much. Any ideas of why I had to pull the cover guys? Thanks also to everyone that helped me when I was stumped.

 

[89blaster89]

I bought it for 700 in march and after doing a top end, reeds, and rebuilding the carb and getting all the leaks sealed up and tors removal my blaster is running. I kinda got tired if working on it cause I couldn't get it running right a couple months ago. But today I got out there and adjusted some stuff in the carb and it fired up. Seemed to be bogging out when I would give it gas so I pulled the air box cover off and the thing is now running like a beast. It has plenty of power and is giving me some white smoke out the pipe but not much. Any ideas of why I had to pull the cover guys? Thanks also to everyone that helped me when I was stumped.

way to rich, plug chop it now

 

[Herpderplol]

Check your main jet.

What motor mods are there??

Clean your air filter and oil it properly.

 

[Blaaster]

Dirty air filter.

Float level incorrect.

Crap in the needle and seat assembly.

Incorrect oil/gas ratio.

Blocked snorkel.

Leaky float.