my pistons stuck? help

[2strokepower]

My piston is stuck to the connecting rod, i took the circlips out, but my piston wont come out. i have tried everything, is there a way to get it off without f*cking the crank up.

 

[yb200]

you need to take the wrist pin out......spray some wd on it and tap it out if its stuck

 

[2strokepower]

you need to take the wrist pin out......spray some wd on it and tap it out if its stuck

it wont come out, i think it might be warped............

 

[yb200]

mine came out hard because i was all carbond up just work at itsince you get a new wrist pin and piston beat it out....just dont hutr the rod...get a new pin bearing too

 

[2strokepower]

im gonna put a thick towel by my connecting rod so i dont damage it............. repppppppp

 

[yb200]

find a socket thats about the same size and tap it out with that

 

[brandoz28]

try carb cleaner, it'll eat the carbon. works like a champ on distributor shafts in cars.

 

[super noober]

on a snowmobile one time i had to trim a 2x4 down to fit perfectly snug between the rod and crankcase so i could smack the pin hard to get it out without hurting the rod. worked kick ass and i kept the 2x4 in case i need it again.

 

[2strokepower]

try carb cleaner, it'll eat the carbon. works like a champ on distributor shafts in cars.

theres no carbon because this piston has only about 25-35 hours on it.

 

[super noober]

use the 2x4 lolol

 

[yb200]

did you take both clips out and try to go the other way with it

 

[2strokepower]

did you take both clips out and try to go the other way with it

yep i don't know why the hell its stuck, it didn't blow up my clutch just ceased up because when the previous owner rebuilt the whole motor he didn't have the proper clutch tightening tool so the clutch came loose and bam it messed things up.

 

[super noober]

2x4............I:I

 

[2strokepower]

2x4............i:i

im gonna try the goddamn 2x4 lol

 

[yb200]

lol....go easy on it

 

[Blasterdude27]

STOP

Hammer time.