Motor

[dre2992]

I am spitting oil out an I fill like I'm loosing power I was told I could have a leek I have a bottom end of another motor will it hurt anything if I put my jug on the bottom of the other motor. I don't want to mess up my piston it's like a year old so I don't want to buy another one

 

[harley1-5]

leak test the old 1 first

 

[dre2992]

i dont have the money to get the tester

 

[harley1-5]

then wait until you do.A leak test is super important

 

[blasterdemon7]

i dont have the money to get the tester

Then don't start it till you get one. A leak tester is a lot cheaper then a rebuild.

 

[dre2992]

Then don't start it till you get one. A leak tester is a lot cheaper then a rebuild.

i have been riding it i just keep spiting oil out

 

[dre2992]

wat could happed to it and i have the the rebelt botom end it would all be free

 

[harley1-5]

an airleak could cause a ean condition resulting in top end destruction

 

[speedyslyder]

you could have a shop fix it$$....did you put 650ml of oil in trans...if you put more then it could be spitting out overfow,underneath headlight..

 

[blasterdemon7]

i have been riding it i just keep spiting oil out

Lol. Enjoy the ride now. You may out of one soon. Park it till you can find and fix what's wrong. If you can't do that, don't come on here crying that your blaster won't run.

 

[dre2992]

Lol. Enjoy the ride now. You may out of one soon. Park it till you can find and fix what's wrong. If you can't do that, don't come on here crying that your blaster won't run.

im not that why im asking i didnt know a leak could coz damage

 

[blasterdemon7]

im not that why im asking i didnt know a leak could coz damage

An air leak will add extra air to the fuel and mix making it run lean. Running lean will destroy your top end.

 

[dre2992]

so i cant just put my jug and piston on my other motor i have rebilt it and have been saving it so i can rebild the one i have now thats leaking. and why cant i find the gasket that goes in between the two sides of the motor

 

[speedyslyder]

you can use the other bottom end as long as the connecting rod is stock .not a plus 4mm then nothing done to the top end..there is no gasket they use yamabond or something simular.

 

[Quadman1]

Your going to need to leak test that to. Maybe sell a bottom end for a leak tester?

 

[dre2992]

Your going to need to leak test that to. Maybe sell a bottom end for a leak tester?

how much can i getfor it

 

[dre2992]

and ya its ALL stock

 

[dre2992]

you can use the other bottom end as long as the connecting rod is stock .not a plus 4mm then nothing done to the top end..there is no gasket they use yamabond or something simular.

i dont understand what you are talking about the topend

 

[Quadman1]

If it's all good then like $200

 

[speedyslyder]

maybe your birthday is coming up?...