Motor work for this winter.

[Cmh156]

Heres what im thinking of doing this winter.

+4 mm stroker.
Wiesco piston.
Aggresive port and polish.
34mm carb.
V force 3's.
Shearer pipe.


What do you guys think? Ill have it done by either flotek or kenedey.

 

[2smoker85]

good setup, id go with the +3mm, just my opinion

 

[Cmh156]

good setup, id go with the +3mm, just my opinion

Why? does the 4mm blow out easy or something? Im looking for power and good take off,for racing.

 

[Wildcard2]

for racing you are going to want the bottum end power and strong mid range, The 4mm doesn,t really add thatmuch more over the 3mm. It would depend on your porting/set-up, that will get you the best kinda power for your build.

 

[Cmh156]

for racing you are going to want the bottum end power and strong mid range, The 4mm doesn,t really add thatmuch more over the 3mm. It would depend on your porting/set-up, that will get you the best kinda power for your build.

Im looking at a agressive trail/mx port since im going to race harescrambles.

 

[2smoker85]

well wildcard beat me to it, and the 3mm goes in much easier than the 4 also

 

[Wildcard2]

Yes the aggressive trail would be the best for that type of riding, and I would go with the 3mm crank if you decide to change the crank.