More power!!

[88blasterman]

i have a 04 blaster with full fmf exhaust, k&n filter, drilled air box. Motor has never been touched! still on injection. Im finding its a little slugish on low end/ accleration, for exmaple coming out of a corner shes a little slow. what are some ways to get more accleration other then porting

 

[245stroker]

Head mod, gearing change, smaller tires, lighter rider

 

[mud runner]

bigger rear sprocket

 

[blasterBruce]

Better Use of the clutch and learn the Powerband

 

[96MXBlaster]

V force 3 reeds, take that air box lid off, Itp holeshot tires head mod.

 

[blasterdemon7]

Better Use of the clutch and learn the Powerband

A+. Just what I was going to say after reading the first post.I:I

 

[Blaaster]

The little lever by your left foot is your friend when it comes to needing more power.

You can move the powerband down into the lower register of the pipe a little, by using a reed spacer block between the reeds and the jug.

A +4 deg timing advance will also make the lows come on earlier.

 

[88blasterman]

im thinking a reed spacer, boyessen reeds and a cfm air box

 

[blasterBruce]

A+. Just what I was going to say after reading the first post.I:I

I'm Not The Brightest Crayon in the Box , But I know How To Use The Power I'm Given , It Just Takes Time and Effort To Learn How To Use The Power On Any Bike Or Quad !

 

[4cfed]

Learn the bike before moddin... simple as be a gear or two lower than you were coming into the corner

 

[blasterBruce]

Learn the bike before moddin... simple as be a gear or two lower than you were coming into the corner

I Second This Statement !!

 

[Budget_Blaster]

The compression good?

Could be time for a rebuild???