LRD or Toomey b1

[d.shook3]

Im debating on which exhaust to get for my blaster. I can get them for the same price. Currently its bored .80 over and has a hot rods crank. I plan on getting ken oconner porting, head milled, and boysen power reeds. I ride back roads of west virginia and might do a little bit of drag racing. so you reccomend lrd or toomey b1

 

[4cfed]

LRD



and a have your jugg re sleeved

 

[blaster01]

LRD


thats all im saying

 

[myusername]

its an oppinion thing. i would say lrd. its the pipe i always wanted. and will work better with future mods, where a toomey, from what i've understood, is good on stock or lightly modded engines but lacks when you get into the heavier modding

 

[brandoz28]

for drag racing and runnin flat out, LRD

 

[d.shook3]

I think ill get the lrd. I'm selling my go kart for $400,and i just found out about a 06 ttr 125 for $150 imma but it put $50 in it to fix it sell for $1000 then ill have $1200 to play with i can get the pipe for $175 might get the 240 big bore kit and get it ported and the head milled get v3's and it should screaaaaaam

 

[scotj77]

flippin bikes isn't always ez. just be sure of what you are gettin. I'll take 400 for sure instead of maybe 1200 any day.

 

[hudack]

in your other thread you said it was 0.60 over now your saying .80 im confuzed witch is it

i say lrd heard they perforum well and they look sweeet as hell also

 

[d.shook3]

flippin bikes isn't always ez. just be sure of what you are gettin. I'll take 400 for sure instead of maybe 1200 any day.

yeah i know what your saying i know what the bike is its close friends 2006 ttr 125 big wheel with bbr exhaust just needs front wheel spacer hes just tired of looking at it has a kx 250 has no need for it

 

[d.shook3]

in your other thread you said it was 0.60 over now your saying .80 im confuzed witch is it

i say lrd heard they perforum well and they look sweeet as hell also

sorry about the confusion i was confused to i havent had it for long i just checked with the previous owner its .80 over 100% positive

 

[Blue By You]

i recomend a cpi pipe.

 

[Blue By You]

Im debating on which exhaust to get for my blaster. I can get them for the same price. Currently its bored .80 over and has a hot rods crank. I plan on getting ken oconner porting, head milled, and boysen power reeds. I ride back roads of west virginia and might do a little bit of drag racing. so you reccomend lrd or toomey b1

i recommend a cpi pipe

 

[1bad442]

Cpi !!!!!!!i:ii:ii:ii:ii:i