loud sound from bottom end

lilblaster

New Member
Sep 3, 2007
109
0
0
NH
I was rideing my blaster and all of the sudden it started makeing a loud clicking noise from the bottom end. I was rideing back to my garage and it wouldnt go past third geer with out dieing. any one know what it could be?
 
Does it need a lot of throttle to move? Mine made the same sort of noise when the piston cracked and went into the bottom end. It was from running lean. is it coming from the crankshaft area?
 
Yes that's exactly it i pulled it apart and figured it out thanks now i need 2 split my bottom end and find the piece
 
If you rode it for a while after the noise started the piston is probably ground up in the bottom. Take the top end off and dump kerosene into the crankshaft area. After that flip the quad upside down and see what comes out of there. Just a little bit easier than splitting the cases. You will probably need new crank bearings and seals and possibly a crankshaft.
 
i took it apart and had some 1 make a tool 2 pull the magneto but he also found big gashes were the piston pice draged on the bottom end